Basic Info.
Type
Lead-Acid Battery Charger
Charging Type
Electric Charger
Principle
Single-Shock Charger
Delivery Time
Within 2 Days
Product Description
DIESEL GENERATOR CHARGER(24V/12V)
1. INTRODUCTION;
Power Input
Voltage 160 ~ 250VAC
DC Output
Voltage 13.8 VDC/Current 6A ~10A
Voltage 27.6 VDC/Current 6A ~10A
Voltage and Current logo on the panel.
Charge Mode
Float
Environment:
Ambient temperature -40° C ~ 50 ° C.
Relative humidity in used 90% MAX.
Protection
Fixed voltage, current limited, auto-feedback.
Fuse protected
Short-circuit protected.
Size:
160mm L * 147mmW * 41.5mm H.
2. OPERATION PROCEDURE
2.1 Make sure you are using the correct battery charger.
2.2 Check for correct input voltage on the battery charger.
2.3 Connect power to lines N & L.
2.4 The indicate LED marked "CHARGELAMP" on the panel should be illuminated when switch power on. The DC output voltage should be as follow: 13.8± 0.2VDC or 27.6± 0.2VDC
2.5 With power off, connect output terminals "+/ " to battery lead "+/ ".
CAUTION!
Terminal lug must properly and securely crimp on to wires and avoid shorted.
2.6 When Power is ON, The current will decrease as the battery charges.
2.7 "0 A" indicates the battery is fully charged.
2.8 Current limited circuits allow engine crankingand running in parallel with the charge alternator when needed.
2.9 Voltage sensing circuit automatically shut offthe power when the battery is fully charged.
3. DANGER
3.1 Potentially lethal voltages are present inside.
Do not open case and attempt any adjust or repair on this unit.
3.2 Ground terminal of charger must be take to earth well.
3.3 Avoid to place the charger in the environment such as high temperature, humidity, acid & alkali, Prevent from insolation, drench and caustic.
3.4 AC input voltage should fit the charger type. We suggest to install a protection device (such as MCCB) inter AC power and charger.
3.5 Never depart the charger.
3.6 Never change internal wiring of the charger.
3.5 Never adjust internal VRs of the PCB intentionally.
3.6 Routine-check of output voltage is necessary
3.7 This is not a power supply. Use only for batterycharging.
Address:
No. 68 Nanshan Road, Fu′an City, Fujian Province, China
Business Type:
Manufacturer/Factory
Business Range:
Consumer Electronics, Electrical & Electronics, Health & Medicine, Industrial Equipment & Components, Light Industry & Daily Use
Management System Certification:
ISO 9001
Company Introduction:
Company Profile
Fujian YuXing Electronic Appliance Co., Ltd is a professional manufacturer on switching power supply, generator and generator parts, electronic household appliance, such as electric warm bag, health care equipment, such as massage device. There are two workshops. We own the domestic first-class level of technical content. Products have passed ISO9001-2008, 3C, CE certification.
It was established in the year of 2002. With registered capital of 6.16 million RMB, covering an area of 2, 000 square metres, over 50 employees, including 3 senior engineers; With the Finance Department, Personnel department production department, technical department, sales department and purchasing department and etc.
Our products are of good quality, reasonable price and good service, . In the process of rapid development, we always uphold the "integrity management, customer first, scientific and technological innovation, aiming at providing our customers with best products and service, and we are committed to working with customers at home and abroad for long-term mutually beneficial cooperation, good faith and work together to create brilliant!