Basic Info.
Type
Lead-Acid Battery Charger
Charging Type
Electric Charger
Principle
Half-Bridge Charger
Usage
Charge for Generator or Pump
Output
13.8vdc 6A~10A; 27.6vdc 6A~10A
Transport Package
One PC/Plastic Bag. 1 Bag/Box
Product Description
1. INTRODUCTION;
Power Input
Voltage 160 ~ 250VAC
DC Output
Voltage 13.8 VDC/Current 6A ~10A
Voltage 27.6 VDC/Current 6A ~10A
Voltage and Current logo on the panel.
Charge Mode
Float
Environment:
Ambient temperature -40° C ~ 50 ° C.
Relative humidity in used 90% MAX.
Protection
Fixed voltage, current limited, auto-feedback.
Fuse protected
Short-circuit protected.
Size:
160mm L * 147mmW * 41.5mm H.
2. OPERATION PROCEDURE
2.1 Make sure you are using the correct battery charger.
2.2 Check for correct input voltage on the battery charger.
2.3 Connect power to lines N & L.
2.4 The indicate LED marked "CHARGELAMP" on the panel should be illuminated when switch power on. The DC output voltage should be as follow: 13.8± 0.2VDC or 27.6± 0.2VDC
2.5 With power off, connect output terminals "+/ " to battery lead "+/ ".
CAUTION!
Terminal lug must properly and securely crimp on to wires and avoid shorted.
2.6 When Power is ON, The current will decrease as the battery charges.
2.7 "0 A" indicates the battery is fully charged.
2.8 Current limited circuits allow engine crankingand running in parallel with the charge alternator when needed.
2.9 Voltage sensing circuit automatically shut offthe power when the battery is fully charged.
3. DANGER
3.1 Potentially lethal voltages are present inside.
Do not open case and attempt any adjust or repair on this unit.
3.2 Ground terminal of charger must be take to earth well.
3.3 Avoid to place the charger in the environment such as high temperature, humidity, acid & alkali, Prevent from insolation, drench and caustic.
3.4 AC input voltage should fit the charger type. We suggest to install a protection device (such as MCCB) inter AC power and charger.
3.5 Never depart the charger.
3.6 Never change internal wiring of the charger.
3.5 Never adjust internal VRs of the PCB intentionally.
3.6 Routine-check of output voltage is necessary
3.7 This is not a power supply. Use only for batterycharging.
Leroy Somer Diode Kit 330-25777 Stamford Diode Bridge SSAYEC432 RSK1001 RSK2001 RSK5001 RSK6001 Stamford Varistor B Stamford Vaistor C MXY MXG 40-12 MXY MXG 30-12 MXY MXG 50-12 MXY MXG 25-15 MXY MXG 40-15 MXY MXG 50-15 MXY MXG 70-15 MXY MXG 100-15 MXY MXG 110-15 MXY MXG 150-15 MXY MXG 200-15 164/184: 25A SLG 224/274: 25A 274/40A HC 4/5: 70A 33025777 and SSAYEC432 Varistor
Generator Automatic Voltage Regulator |
Stamford | Leroy Somer | Marathon | Mecc-Alte | Kutai | Marelli | GAVR/CF/YH | Others |
Basler | Cat. |
SX460 | R230 | SE350 | UVR6 | EA06A | M40FA640A | GAVR 8A | ST/STC gb160 gb170 |
SX440 | R250 | SR7-2G | EA04C | ACF 12A | ST/STC(Plastic case) |
AS440 | R438 | AVC63-4 | EA05A | GAVR 12A | 2~3.5 kw avr |
AS480 | R448 | AVC63-7 | DAEWOO DGC2007 | EA350 | M16FA655A | AVR 15A | 5~7.5 kw avr 186F |
MX321 | R449 | EA08A | GAVR 15A | 5~7.5 kw welder 186F |
MX341 | R450 | AVC63-12 | KUTAI EG2000 | EA16 | VR6 | GAVR 20A | Lanzhou KXT-2WC avr |
or NUPART | R220 | EA15A | | 10KW avr YX3DA 2DA |
Cummins Parts |
3044196 | 3044195 | 3030256 | 3062322 | 3098693 | 3037359 | 4913742 | 3408326 |
3408324 | 4914090 | 4914091 | 3655944 | 3034572 | 3408328 | 3408329 | 3032733 3971944 |
GAC Parts |
ESD5500E | ESD5550 | ESD5570 | ESD5111 | ESD5120E | ESD5522 | ESD5520 | ESD5522 |
ESD5131 | ESD5525 | ESD5221 | ESD5330 | MSP675 | MSP676 | MSP677 | MSP678 |
MSP6732C | MSP6729 | MSP6731 | MSP6714 | MSP6719 | MSP6724 | M16 | ADD 175 12V 24V |
MSP3721 | MSP6273 | ADC225 12V 24V | ADC120 12V 24V |
DSE parts |
701AS MS | 702AS MS | 703 | 704 | 705 | 501K | 710 | 720 |
5110 | 5120 | 5210 | 5220 | |
Generator/Genset Charger |
178A 186F | 670 | 680 | 12~24V 5A | 12~24V 3A | 12/24V 6A~10A |
Varistor and rectifier diode kit |
Leroy Somer Diode Kit 330-25777 | Stamford Diode Bridge SSAYEC432 |
RSK1001 | RSK2001 | RSK5001 | RSK6001 | Stamford Varistor B | Stamford Vaistor C |
MXY MXG 40-12 | MXY MXG 30-12 | MXY MXG 50-12 | MXY MXG 25-15 |
MXY MXG 40-15 | MXY MXG 50-15 | MXY MXG 70-15 | MXY MXG 100-15 |
MXY MXG 110-15 | MXY MXG 150-15 | MXY MXG 200-15 | 164/184:25A | SLG 224/274:25A |
274/40A | HC 4/5:70A | 33025777 and SSAYEC432 Varistor |
Address:
No. 68 Nanshan Road, Fu′an City, Fujian Province, China
Business Type:
Manufacturer/Factory
Business Range:
Consumer Electronics, Electrical & Electronics, Health & Medicine, Industrial Equipment & Components, Light Industry & Daily Use
Management System Certification:
ISO 9001
Company Introduction:
Company Profile
Fujian YuXing Electronic Appliance Co., Ltd is a professional manufacturer on switching power supply, generator and generator parts, electronic household appliance, such as electric warm bag, health care equipment, such as massage device. There are two workshops. We own the domestic first-class level of technical content. Products have passed ISO9001-2008, 3C, CE certification.
It was established in the year of 2002. With registered capital of 6.16 million RMB, covering an area of 2, 000 square metres, over 50 employees, including 3 senior engineers; With the Finance Department, Personnel department production department, technical department, sales department and purchasing department and etc.
Our products are of good quality, reasonable price and good service, . In the process of rapid development, we always uphold the "integrity management, customer first, scientific and technological innovation, aiming at providing our customers with best products and service, and we are committed to working with customers at home and abroad for long-term mutually beneficial cooperation, good faith and work together to create brilliant!